BS6724 Mains Cable – SWA, LSZH, 1kV – 25mm to 400mm

Description

Overview

Used in power networks, indoor, outdoor, underground. Can be used in cable ducting for installation where fire, smoke emissions and toxic fumes create a potential threat to life and equipment.

STANDARDS

• BS6724
• Acid gas emission to BS EN 50267 (IEC 60754-1)
• Smoke emission to BS EN 50268 (IEC 61034)
• Flame propagation: IEC 60332-1, IEC60332-3, BS EN 50265, Category C; BS EN 50266
• BASEC Approved (* refer to construction section)

CONSTRUCTION

Conductor: Plain Annealed Stranded Copper Conductors
Insulation: Cross Link Polyethylene (XLPE)
Bedding: Low Smoke Zero Halogen (LSZH)
Armour: Galvanised Steel Wire Armour (SWA)
Sheath: Low Smoke Zero Halogen (LSZH)
Sheath Colour: Black

The following cables are manufactured to IEC 60502-1 and are not covered by BASEC:

• 5 Core 95mm²
• 5 Core 120mm²
• 5 Core 150mm²
• 5 Core 185mm²
• 5 Core 240mm²

CHARACTERISTICS

Voltage Rating: 600/1000 Volts
Temperature Rating: -25°C to +90°C
Minimum Bending Radius: As Per Manufacturers Datasheet

Should not be installed at temperatures below 0°C or above +40°C

For more information please consult a member of the JIANYE CABLE